|
The perfect economy micro quad copter power set. This set includes four Suppo A2204-14 motors, four Hobby Wing Fly Fun 6A brushless esc's, four female JST connectors and one G-210615 4-in-1 power connector. Everything you need to power your quad copter except a battery. Will work great with your home built micro quad or others.
Suppo A2204/14
Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.
|
|
No. Of cells
|
RPM/V
|
Max. efficiency current
|
NoLoad current / 10 V
|
Current
capacity
|
|
Ni-MH
|
Li-Poly
|
|
A2204-14
|
6-10
|
2-3
|
1400 KV
|
2 - 6 A (>74%)
|
0.3 A
|
7.5A/60 s
|
| |
Max. efficiency
|
Shaft diameter (mm)
|
Weight with cables
|
Internal Resistance
|
Dimensions (mm)
|
|
A2204-14
|
75%
|
|
19 g
|
550m?
|
27.6x11.5
|
| |
Recomended model weight |
Recomended prop without gearbox |
| A2204-14 |
3D 220 g and under |
2xLi 8040 |
3xLi 7035 |
|
| |
|
|
|
|
An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells. Very lightweight at 19 grams including integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall mount. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.
The motor features a 3mm hardened steel shaft, dual ball bearings, integral prop saver for APC E props and integral firewall mount flange. Note that the prop saver is sized for APC props. GWS props will need some modification to fit properly. Countersunk mounting holes have 31mm spacing on centers.
Hobby Wing Fly Fun 6A ESC:
1 Specification
1.1 Output: Continuous 6A, Burst 8A up to 10 Secs.
1.2 Input Voltage: 2 cells lithium battery or 5-6 cells NiCd/NIMh battery.
1.3 BEC: 0.8A / 5V (Linear mode).
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
1.5 Size: 24mm (L) * 12mm (W) * 6mm (H).
1.6 Weight: 6g.
2 Features
2.1 Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.
3 Advantages
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
3.4 Compatible with Hobbywing's Program Card
|
